swaluda1 Posted October 11, 2014 Report Share Posted October 11, 2014 Im not with the vehicle right now and so cant tell, my question is how many tie rod ends are there and how many ball joints are there on this vehicle, I have the Plymouth Service Manual but it doesn't mention it and I would like to order a steering kit for my project. Also if you could direct me to a good supplier I would preciate it. Thanks guys, Stan Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted October 11, 2014 Report Share Posted October 11, 2014 Stan, 4 tie rod ends. About $37 each at oldmoparts.com (andy bernbaum). DJ Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted October 11, 2014 Report Share Posted October 11, 2014 no ball joints..those came later...you will instead inspect close your kingpins and bushings.. 1 Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted October 11, 2014 Report Share Posted October 11, 2014 Tim I missed that question didn't I !! Still need to go get them new reading glasses! DJ Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted October 11, 2014 Report Share Posted October 11, 2014 DJ194950, on 11 Oct 2014 - 7:15 PM, said: Tim I missed that question didn't I !! Still need to go get them new reading glasses! DJ Doug..I just picked up on the fact that you did not want to come off as a know-it-all...and therefore left part 2 for someone else... Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted October 11, 2014 Report Share Posted October 11, 2014 Thanks, Tim! DJ Quote Link to comment Share on other sites More sharing options...
desoto1939 Posted October 12, 2014 Report Share Posted October 12, 2014 Ok according to my MCQuay Norris catalog they list 6 tierods for the 40-54 Plymouth Right side right ES60R left es60L Left side right es131r left 131L Outer Ends right ES166r Left ES166R rich Hartung Desoto1939@aol.com Quote Link to comment Share on other sites More sharing options...
deathbound Posted October 12, 2014 Report Share Posted October 12, 2014 (edited) Ok according to my MCQuay Norris catalog they list 6 tierods for the 40-54 Plymouth Right side right ES60R left es60L Left side right es131r left 131L Outer Ends right ES166r Left ES166R rich Hartung Desoto1939@aol.com Should the last one listed be.....left ES166"L"? Edited October 12, 2014 by deathbound Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted October 13, 2014 Report Share Posted October 13, 2014 P-20 steer diagram. attached. Book parts list two "end packages with only 2 diff. #'s" can be assumed that is 2 per package??, as pic shows four rod ends. Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted October 13, 2014 Report Share Posted October 13, 2014 (edited) P-20 steer diagram. attached. Upper pic is P-19 &20--D33-34 Lower is desoto and chrysler Book parts list two "end packages with only 2 diff. part #'s" -can be assumed that is 2 per package??, as pic shows four rod ends. DJ correct application #'s Edited October 13, 2014 by DJ194950 Quote Link to comment Share on other sites More sharing options...
desoto1939 Posted October 13, 2014 Report Share Posted October 13, 2014 Re checked the McQuay book and the outer ends are both listed as ES166R for both the right and left Rich Hartung desoto1939@aol.com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.