catfishcuz Posted April 16, 2013 Report Share Posted April 16, 2013 Working on 49b1b and was wondering if the cab mount hardware is available I know the rubber is what I'm really looking for is the sleeve with the washer that goes between the rubbers. Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted April 16, 2013 Report Share Posted April 16, 2013 I reused my old ones after having them replated. I have NOT seen a vendor that sells those, but shodl be easy enough to make with some tubing and washers. Quote Link to comment Share on other sites More sharing options...
catfishcuz Posted April 16, 2013 Author Report Share Posted April 16, 2013 That's what I was thinking would anyone know the size of the bolt and tube length and dia. Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted April 16, 2013 Report Share Posted April 16, 2013 I think three are either 1/2" or 9/16" and the cab front is 5/8"? I'd have to creeper under FEF and measure, which I can do if you need me to. Quote Link to comment Share on other sites More sharing options...
catfishcuz Posted April 17, 2013 Author Report Share Posted April 17, 2013 Don't bother someone probably has one out that they can measure. Quote Link to comment Share on other sites More sharing options...
lugnut123 Posted April 17, 2013 Report Share Posted April 17, 2013 You can make a mounting bolt harware from a 3/8 pipe. Cut the pipe 2 1/4 inchs tall. A 1/2 inch bolt should slide threw the pipe. weld that to a washer that is 1/8 inch thick by 2 1/4 in ch diameter. This is what the mounting harware on the back mounts in my b-3-c are.. Quote Link to comment Share on other sites More sharing options...
catfishcuz Posted April 17, 2013 Author Report Share Posted April 17, 2013 Thanks Lugnut what's the length of the 1/2 inch bolt Quote Link to comment Share on other sites More sharing options...
lugnut123 Posted April 18, 2013 Report Share Posted April 18, 2013 4 inch bolt on mine.I think three are like this but the one in the driver front is just a hard rubber. Hockey puck that's bolted solid. My rear mounts came off easy but the fronts I had to torch so I don't have them off yet. lugster Quote Link to comment Share on other sites More sharing options...
lugnut123 Posted April 20, 2013 Report Share Posted April 20, 2013 I was needing to fab some rear moter mount hardware.You can use a 3/8 pipe 2 inchs long and weld it to a 2 1/2 inch washer. . The 3/8 pipe will fit into the rubber mount s easy. On the moter mounts they use a 3/8 bolt instead of a 1/2 inch. I went to my local specalty nut n bolt place and they had some 3 inch washer that were 1/4 inch thick. Alittle bit thick but I will make them work. lugs nutz Quote Link to comment Share on other sites More sharing options...
dodgemex53 Posted April 26, 2013 Report Share Posted April 26, 2013 Hi visit Robertsmotorparts.com/trucks_parts Quote Link to comment Share on other sites More sharing options...
HanksB3B Posted April 26, 2013 Report Share Posted April 26, 2013 (edited) Seems I do this on a regular basis. I guess that's a good thing catfish cuz it means more of our trucks are being saved. Good Luck, Hank Edited April 26, 2013 by HanksB3B Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.