Jump to content

CR53

Members
  • Content Count

    8
  • Joined

  • Last visited

Everything posted by CR53

  1. CR53

    Chrysler New Yorker c-56 1953

    Thank you again! They assure me that it corresponded to part 1320561; and you are right... they have just told me that it had been packaged incorretly...
  2. Dear All I would be very grateful if somebody could tell me the type of fluid drive seal that my Chrysler New Yorker sedan c-56 1953 v8 has, two options: i) bellows type or ii) housing type. Any help is appreciated. Thanks in advance!
  3. CR53

    Chrysler New Yorker c-56 1953

    Dear Dodgeb4ya I have received the graphite seal part # 1320561 for my Chrysler New Yorker sedan c-56 1953 v8 (fluid drive housing type). Unfortunately this part does not fit to my car. See picture attached. It has not the two notches, so I suppose it is for a Bellows type seal. I have found this other part on ebay which seems to have the two notches. Do you think it is the one appropriate to my car? http://www.ebay.es/itm/Torque-Converter-Carbon-Seal-Chrysler-Fluid-Drive-Antique-Special-H-D-/272722916109?hash=item3f7f8d730d:g:j~IAAOSwgv5ZRX3s thanks again for your support!
  4. CR53

    Chrysler New Yorker c-56 1953

    Thank you again for the information! Any website for purchasing and delivering them to Spain? (did you hear about https://www.collectorsautosupply.com ?) Regarding the Graphite seal ring part # 1320561, I have checked it (see link) and it seems not to have the two small cut out notchs. Is it valid anyway for the housing type seal? http://www.ebay.com/itm/Mopar-NOS-Fluid-Drive-Floating-Seal-Ring-50-54-D-51-53-DS-50-53-C-Y-/292096746459?hash=item440252a3db:g:R78AAOSwWiBY~2SQ&vxp=mtr Thank you very much again for your kind support!
  5. CR53

    Chrysler New Yorker c-56 1953

    Dear Dodgeb4ya Do you know where I can buy the "graphite seal ring and the rubber seal ring gasket ( large Rubber O-Ring)" you have previously commented? Regarding the seal spring, I found this one: http://www.ebay.com/itm/Mopar-NOS-Fluid-Drive-Seal-Spring-41-50-Dodge-DeSoto-39-50-Chrysler-Imperial-/291835572578?hash=item43f2c17162:g:TyAAAOSwARZXoNqH&vxp=mtr Do you think is it appropriate for my Chrysler New Yorker sedan c-56 1953 v8? Thanks in advance!
  6. CR53

    Chrysler New Yorker c-56 1953

    Thank you for the information! Nevertheless, I do think that in my case I need the other parts (they are not in good conditions), in particular the seal spring, which is in very bad conditions and not working properly. I would be very grateful if you could provide me with websites where I can find these parts to be sent to Spain. Thanks again!
  7. CR53

    Chrysler New Yorker c-56 1953

    It seems that the picture I referred to previously is not available. I am attaching it in this post. Thanks!
  8. CR53

    Chrysler New Yorker c-56 1953

    Thank you very much for the information! In that case, I would need the following parts (see picture) of my Chrysler New Yorker sedan c-56 1953 v8 (fluid drive housing type): -i) Seal housing gasket; ii) Seal ring; iii) Seal ring gasket; iv) Gasket retainer; v) Seal spring. Any help would be appreciated on how to obtain these parts. I only found the seal spring in ebay for 39-50 Chryslers, and I am not sure if it suites to my model. In addition, I would need these parts to be shipped to Spain. Thanks in advance!
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use