DMack48can

Can anyone tell me how to put in new cab mount rubber in. I ordered four sets one of which is 3/4" and one is 1 1/2". Does the thick one go between the floor and the frame or the thin one???

Bill great to have knowledge on my side as I was beginning to think I could never find out this motor. Now maybe I can find some parts and get on with the rebuild. Thanks Don Kamloops B.C.

Looking for an ID on a 1941 Dodge car engine. Engine number is D19S2996C . According to my machine shop it is bored 3 3/8 + 60. It does need to be re-sleeved. Also need to know bore and stroke so that we can order the right sleeves. Crank # is 52146. Is this motor bored out way too much or is it supposed to be a 3.25 " bore. The pistons that are in it have the number 1603267 stamped on them. Engine casting # is 666029. Can anyone help. Don

The T307 has two six inch cracks in the side of the block which pushed out unevenly when the block froze. Internals aregood so will have spare parts . My d19 is the one that is seized so will have to tear it down and see if it can be salvaged.

To all concerned it turned out that this T307 block is no good and now looking at repairing the original. The serial number is D19S2996C, the block is 25.25 and 3 3/8 bore. It is some what seized therefore it may be impossible. Can anyone give a year and displacement and any idea to loosen her up. I understand that this is a Canadian long block car engine? Any thoughts appreciated.

To B-Watson thanks ever so much with all the info . I find out tomorrow if I bought a good engine or I will be searching. Fingers crossed and thanks for your help. Don

Thanks for the help as my search goes on...............

this may be a 53 -56 230 ?

from what I can gather this is 51-53 flathead

had the machine shop mike a piston

Another thing to add to this is that it is a 3 7/16 bore. I read one of Bills posts that T307 is the same as T306 except that it is the 25.25 Canadian equivalent. Don

I am a new member working on a 1948 Dodge 1/2 ton. The motor was seized so I purchased a used one. I need help identifying it. It is a 25.25 Canadian Long block. Serial # is T 307 18107C, Build date is E 23 2. Head casting #s are E 202 and 1327337. I know that the T 307 shows it is Canadian as well as the C on the end. Can anyone Help with the year it is and what the displacement?