mikehalek

I havea AC Type EP-11 6 volt, 6 PSI electric fuel pump that will be going on my P15 with twi B&Bs with dual exhaust. Has anyone used this pump and what was your experience? This unit also has one electrical connector which adds to my confusion since I am electrically defecient. It is also good with 10% alcohol. Thanks, Mike

I have a 6volt electric fuel pump that will be going on the 48 P15. It will be used with the regular fuel pump on a intermittant basis. It runs 6 PSI. Is this too much pressure? IF so, how do I compensate for it? Thanks Mike

Please save yourself a potential disaster. Move your gas filter from above your manifolds. Metal filters are better than plastic ones but one drop of gas on a hot manifold and your nice engine is toast. Mike

It seems to be vapor lock season again. I think I have a gradually weakening fuel pump diaphram and want to put a 6 volt electric pump on. Which is best? 1.use a switch to use the electric pump when needed. 2. use the new electric pump all the time and take off the old pump. What has your experience been with either of these plans? Thanks, Mike

I thought some D24s had a conventional driveshaft. If that is so, can one of these be altered to fit a P15? Or are there other Mopar driveshafts that would be a better fit? Thanks, Mike

Hi ED, congratulations to You and Carmen. Here is wishing the two of you happiness for the rest of your lives. Mike H.

Don's miracle starting system does not mention the use of a choke. I have a hand choke, under this system what do you do with the hand choke? Thanks, Mike

Absolutely, I plan to do what you are going to do, and your experience would be invaluable to many on the forum. Thanks, Mike

Hello All, I found a electric wiper out of a 49 Dodge. Has anyone out there used this model to replace their vacuum unit on a p15? Any help or tips would be appreciated. Thanks, Mike

The two pictures that you show of your engine seem to have different air cleaners. Where did you get the round ones with the holes in them?

littleman, for us guys who have a tough time with wiring stuff, would you diagram your od set up? Thanks Mike

Anybody out there know the torque stats for 218 engine oil pan bolts

Precision body in Des Moines is still in business. I was there over the 4th and purchased some floor parts.

Howard, Is your car up and running yet? Would be very interested in your thoughts on your rear end ratio and od performance. Thanks, Mike

Hi Wayne, congrats on a succesful run. These old P15s are tougher than people give them credit for. Have a couple of questions for you, will try to call tonight. mike