racerboy9

I painted mine red. Thought I read some Dodge literature a long time ago that mentioned the red handbrake.

There is one on Ebay now for $150 with that part number and it says 10 available!

I am in for a copy as well!!!!

I used Rhode Island Wiring to make one for my '51 BC3. Not cheap but they did a great job. Accurate copy and I've never been sorry I did it. I think you can get individual sub-harness' as well.

Try MR. G's fasteners. Go to fasteners>washers>periphery washers. They have the square washers you seek.

I was having the same problem. Check your screen, I saw a small link to go back to the old Ebay motors set up. Seems like when you get comfortable with their system and know your way around they want to change and start you over on a whole new learning curve.

SMS Fabrics has the original vinyl available. Not cheap but its the right stuff.

The ones from Roberts Motors are nice but the color is a little too dark. You could repaint with the correct shade of red.

Missed reading the post above mine. Good luck!

You could also get some key stock for about $1. Must be about 7/16". Pretty common item at hardware stores and bearing supply stores.

You might want to try using another oil pressure gauge and see if you get a different reading. It could just be your gauge.