Jump to content

55 Fargo

Members
  • Posts

    10,373
  • Joined

  • Last visited

  • Days Won

    21

Everything posted by 55 Fargo

  1. You and me both TJ, a year since 318 swap, no ebrakes just yet.
  2. Hey all, anyone purchase a new 1 piece rubber windshield rubber for a C Series truck? I bought the type, with channel cord lock Installer came by, brand new windshield for my 55 Fargo. The product looks and feels okay, but was no way going to fit into windshield opening. The installer had to stretch it several times for it, fit in opening and to install. Very frustrating, a simple install took a lot longer because of this. The corners are a little wonky looking, and inside the cab there is a gap between rubber and glass for some distance. Other than this it is in good and secure did not seem to leak any water from outside. So he aware when ordering this may or may not be a problem with this particular windshield rubber. Roberts was contacted to inform them of my experience, they of course were sorry for this, but case closed. Just for any C series owners a heads up on this product. I will live with it, and not be taking out window to swap in another gasket.
  3. Appropriate non fluid drive bell, clutch, 3 or 4 speed truck trans, possibly some clutch linkage difference. Driveshaft length differences? Not much more.
  4. To OP you posted this ideas/question on the HAMB. You have had some good direction. This is appropriate forum for you to get to know your D24. Not sure you will find the support or guidance for a 302 swap here, but you never know. Good luck with your quest...
  5. Without taking the thread off the rails can you post pics of your 52 Suburban love those cars.
  6. Yes of course a Windsor is a 5 x 4.5, the biggins such as Limo and 8 passenger and perhaps TC convert are 5x5...
  7. Good stuff, I thought the big drums and hubs off limo sized 12 inch brake cars were bigger than the usual 4.5 on 5? When did you see Tims beast? Quite the car isnt it?
  8. You know this is not a bad idea. The 12 inch brakes have a 5x5 pattern though correct? To be honest the 11 inch brakes with good drums and well adjusted will put you into the dash too.. Discs are fine too, easier for most but not necessarily gonna be 100s of times greater than dual WC brakes setup well. Trouble is getting the shoes tru to drums in correct clearances. Tim Kingsburys hot 265 powered 49 Plymouth has 12 inch Chrysler drum brakes up front... A lot of the disc kits work fine, even with stock MC. There certainly good for those who say have no decent drums, and for those who absolutely cannot "get it right" with Lockheed Brakes. On my 55 Fargo I have stock up front and modern bendix 10 inch drums in rear. It stops decent, the rears are better though and this will need to be addressed. I have considered going to more modern dodge bendix drum brakes up front.
  9. Just started my 318 this evening after 5 days. Tried the crank a few times, wait then crank a few times. It started after 4 or 5 such cycles. If I prime bowl it fires immediately. Gonna add an electric for priming, just gonna have to be this way..
  10. Ryan, if you already have front end rebuilt with Disc Brakes, all good to go. I say go for it get the 3.9 mocked up and into the car....
  11. Hey I agree 100% on a "NO TO" a complete frame or front sub frame swap. The IFS on this setup is real decent, add disc brakes too for your added safety and braking efficiency. Lots of Rodders can and do these swaps, and sure you or OP can handle it too, but it aint necessary, up above and others have some more complicated ideas, that are okay, but far from whats needed for these cars. I also lean toward a V8 on this 318/360 or 5.7 L HEMI..
  12. Not very cold here at all. And for weeks already not much snow and none til December that stayed in ground. While its not 7c its about -1 c Mid November it was 20 c 1 sunday. Did I mention Manitoba has real hot summers and real humid. Alberta summer is cold comparisons, if you don't have AC here you will roast at night..
  13. My homestead yesterday morning. Beautiful Hoarfrost and note ski/tracks in ditch.
  14. Sniper and Los Control, good news it will melt and be gone soon Im sure. Up here we will have snow on ground til April...lol
  15. Just snow overnight? Texas shows no snow on NOAA website. Happy sleddin...
  16. How would yall like about 20 hours due north of Amarillo where I live...lol I would guess about 1200 miles or so north of Amarillo..
  17. Funny... senior Canadian climatologist up here so far calling it bang on...real good liar...lol
  18. Actually the Texas panhandle and Amarillo can get cold and snowy. But it don't last long Im sure.
  19. Looks like fun Rob, 2 days ago for me. A little snow here but not real cold so far. https://youtu.be/9dKJNp2SeEk
  20. Are you referring to the Mechanical or Electric pump Tod? Sounds like yours and Sam's post cleared it up...thanx
  21. Here's something I have pondered, if the electric pump is used to prime or in a heated fuel issue. The fact the pump is not being pumped often but has fuel running through it, will its innards be prone to premature wear for any reasons?
  22. Thanx for the info Merle. This pump is same on 12 vdc I take it. On my 318 with mechanical fuel pump, Carter BBD 2 bbl carb same issues. If i dont start engine after a day or so gotta prime carb or lots of cranking. Headscratching thing is I use non ethanol fuel too. So either the bowls are drying up fast or fuel is back siphoning. With a prime she fires instantly, no problem in hot weather I have noticed yet, but sure there will be.
  23. Nope it does not. The 237 is no different than a 251.
  24. Well great 4 it...lol Yes the pattern on rear of the 23.5 engine and 25 inch engines is same. Crank depths and bolt patterns may vary. Meaning a 201 or 217 has a 4 bolt crank while a 230 has the 8 bolt crank. What is the trans adapter for? The T5 on the truck bells does not require an adapter plate. It requires a center hole retainer and a pilot bearing, throw out bearing bushing, clutch disc change etc. The A833 swsp requires an adapter plate for both car and truck application's.
  25. The C series bell will not have a bracket on side for the master cylinder. Your 270 Poly bell should be similar..
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use