Jump to content

Joe Flanagan

Members
  • Content count

    4,837
  • Joined

  • Last visited

  • Days Won

    10

Joe Flanagan last won the day on May 13 2015

Joe Flanagan had the most liked content!

About Joe Flanagan

  • Rank
    Zen Master, I breathe vintage mopar!

Converted

  • Location
    Alexandria, VA
  • Interests
    1949 Plymouth Special Deluxe

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Joe Flanagan

    Really bad ticking/tapping noise

    I had a noise like this that was coming from my pulley. It was bent and wobbled but there was nothing else visibly wrong with it. I was convinced that the problem was elsewhere. I replaced the pulley and the sound was gone. I believe you said you ran it without the fan belt connected and the noise was still there, but since it seems to come and go, you might want to look into it. Another thing to look at: I once had a dent in the bottom of the oil pan that was just enough to cause the flywheel teeth to clip it as they went by.
  2. Joe Flanagan

    1,000-Mile Road Trip

    I will, Greg. I might be living in Florida by that time so it would be an even bigger trip.
  3. Joe Flanagan

    1,000-Mile Road Trip

    Thanks, Pete. I'll be doing it again soon. That's what I got into this for. Whatever happens, happens (but I hope nothing does).
  4. Joe Flanagan

    Control Arm Bushing

    I was thinking the same thing. Just a couple of minor things like the engine and the rear axle. But thank God the chrome script on the front fender that says "Special Deluxe" was on nice and tight.
  5. Joe Flanagan

    Control Arm Bushing

    Tim, I went over everything yesterday and found a couple of things that were loose, namely the rear engine mounts and the nuts on the u-bolts for the leaf springs. Everything else was secure. Rich, thanks for the offer of the special tool. I think I will try to improvise something that will do the same thing. It shouldn't be too hard. What you see on the radiator hose is the remnant of some packing tape that was stuck to it at one time.
  6. Joe Flanagan

    Control Arm Bushing

    I don't know the answer to that question, Tim. I suspect it was a bone-headed move on my part back when I had just started the project and I knew very little. It might be one of those "I'll address that later" items. I've discovered a few of those.
  7. Joe Flanagan

    1,000-Mile Road Trip

    I didn't take many pictures on my trip, but this is one I wanted to post. It was while the sun was coming up over the Pennsylvania countryside:
  8. Joe Flanagan

    Control Arm Bushing

    Yesterday I was greasing the Plymouth when I noticed that one of the upper control arm bushings is further out than it ought to be. I don't know if I installed it like this (it was about 13 years ago) or if it worked its way out. It's the bushing on the left as you look at the first photo. Can I just screw it back in or will that alter the dimensions of the control arm? I recall during the assembly that that was a particularly sensitive thing. I know that they are assembled off the car so that you can get all the measurements right and then installed as a piece. But since everything is bolted down now, could I just screw that one bushing back to where it's supposed to be? Here you can see how the bushing on the right is screwed all the way in but the one on the left is out: Closeup of the bushing in question:
  9. Joe Flanagan

    Tire Question

    These rims were pretty corroded. I cleaned them up and smoothed out the rough spots with JB Weld. It has worked very well except this particular tire.
  10. Joe Flanagan

    Tire Question

    Yes I have radials on the original rims. I was wondering if there was some dynamic at work while at highway speed that I was unaware of. The weight of the car alone will not cause the tire to leak. I plan to put it back on the car and check it with soapy water. I suppose the hubcap could have started moving again and bent the valve stem over but I have inserts (or whatever they are called) that normally prevent that from happening.
  11. Joe Flanagan

    Tire Question

    I have a tire that kept going flat if my car sat for long periods. I took it down to the tire shop and they repaired it, saying that it was leaking around the rim. It was fine for a few days but then it went flat on the highway on my recent trip to Massachusetts. I changed to the spare and reinflated the flat. It has kept pressure for over a week now while sitting in the trunk. Any ideas what's going on with it.?
  12. Joe Flanagan

    1,000-Mile Road Trip

    All true. I sometimes start to doze off when on long trips in our modern car but that didn't happen on this trip. What really wore on me was the sound of cars roaring past me constantly, especially the semis. One of the things people who rode in the car tended to comment on is how smooth the ride was. That surprised me too when I first started driving the car. I guess that's the new springs, shocks, king pins, tie rod ends, steering gear box bearings, etc. I forget much of the stuff I did on this car. Anyway, I much prefer the back roads. I think it's just a nicer experience overall.
  13. Joe Flanagan

    1,000-Mile Road Trip

    I don't know, Don. But one thing is for certain, it will not be on any interstate highways. That is no fun at all.
  14. Joe Flanagan

    1,000-Mile Road Trip

    I have to say I feel a lot more comfortable with the car now, having put 900 miles on it during that trip, almost all of them on the highway. As I said in an earlier post, a lot of the trouble is just nerves and anticipating what might go wrong. By the way, Tim, I don't know if you recall but you called the problem exactly during all the back and forth on this thread.
  15. Joe Flanagan

    1,000-Mile Road Trip

    I rented a U-Haul trailer and brought it as far as Edison. That put me within AAA's range for a free tow if anything went wrong.
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use