Leaderboard

Another vote for making your own. It’s like a puzzle to solve. You screw a few up. You learn. You get better. Building and shaping your first ever 3 ft line across the left rear axle housing? Order two 25 ft rolls of 3/16” brake line tube. 😄

preformed and then curve and bent to fit a box for shipping, you better off making your own tailor fit set.......

I've heard a rumor that flathead replacement fuel pumps have a half-baked machined pin installed 🤔

It’s good to learn with these old bombs. When you get that perfect double flare you’ll then realize that you forgot to put the nut on. Oops . I enjoy making up my own fuel and brake lines. I agree with Plymouthy Adam’s, you’ll have to reshape them anyway after unpacking them.

My Great Grandfather, and guessing my Great Grandmother with the '55 Dodge (I'll be inheriting this summer) and what I believe is a '55 DeSoto. The truck was my Great Grandfather's then my Uncle's, and then my Parent's, and soon to be mine. My Dad just told me that he is getting too old to work on too many toys, and he is giving it to me. It is in a little worse shape than here, but pretty much original. I'll post pictures of it's current state, in the correct area, when I get it out of the barn, but from what I recall it definitely will need a gas tank and fuel pump, amongst other things.

What is Petronix saying about this when ya ask'm about this prob?

And when you turn the key back off, the current flow is interrupted

I agree with you that could happen, but only because it is a Pertronix. Points system won't do that because they fire on points opening. With the points open at rest there is no current flowing so it won't fire. Closed at rest there is current but the closed points don't interrupt the flow so spark. I have read that Pertronix fires on point closing, but have no personal experience with them.

VINTAGEPIC: saw this Dodge on the FB

SURVIVOR: saw this Dodge between Lake Graham and Newcastle

I consider points a switc0h. Open, close, on, off. Ignition switch on, ign switch off. Logic tells me my previous post is a possible scenario and every electrical circuit in the truck is available when the key is on.. I don't know whether or not Pertronix would or could respond similarly. How repeatable is this condition? Now that it's sat for a while will it do it before starting the engine or does it have to be run for a while. Will it do it after sitting for ten minutes or a half hour? Will it do it a second time, turning the key on and off immediately after it does it?

Just installed a Red Crown Gasoline light in our carport to go with the truck. I am pretty happy with the results.

I went to Tractor Supply this past weekend, for the second time in my life. That is all, carry on ship's work.

The decline of the Champion Spark Plug and the death of a company. The Champion electrode was made from mainly tungsten powder at a company called Fansteel in North Chicago. They mixed, pressed, sintered, burnished and then brazed it to the copper sparkplug core before shipping them out to Champion for assembly. The company also made many other items like the Lynx golf club casting, High end tungsten darts (Black Widows & Diamond Backs) as well as supporting WW1 & WW2 military needs, they downsized in the late 80s and were dismantled early in the 90s along with VR Wesson a sister company that made carbide cutting tools. Fansteel Inc.docx

So I am watching Roadkill and they are in Darlington. In the museum, Freiburger points out his favorite exhibit, the winner of the first 500 mile race. A 1950 Plymouth.

Sadly they nay or may not have them .... They do have a nice goodbye letter .... just selling off what they have in stock but think they wrote it 2 years ago. https://www.rustyhope.com/