Jump to content
  • entries
    62
  • comments
    370
  • views
    159,747

About this blog

Ramblings about Vintage Mopar Performance stuff with the Kingsbury's and Asche's

Entries in this blog

Update "AoK - New Dual Carb intake for the USA flathead 6"

Howdy Folks - Well while we are awaiting the first lot of intakes to be cast George has been busy working on various linkage combinations. Here is the 1st look close up of the finished prototype AoK dual carb intake for 23 1/2" USA flathead mopars. This one has - prototype linkage being developed for trucks or 1933-1938 Cars Notice the left carb linkage bar has been cut short, and is not hooked to the left carb. That is strictly for prototype purposes It shows how the serial number and

timkingsbury

timkingsbury

Update Final preproduction prototype done!- "AoK - New Dual Carb intake for the USA flathead 6"

Well folks its back from the machine shop and for the last prototype before production it is awesome! Here are a couple of pictures.. The intake is designed to be able to accommodate a linkage bar on the inside or outside of the intake, as well as a casted section for truck usage, which will double as a spot for a serial number. We will try and early this week get an eta on getting the 1st batch, as well as George will make up a set of linkage and we will try and get a shipping

timkingsbury

timkingsbury

Part 4 - 1st car I purchased! .. Let the fun begin or locked down and let it rip!

In this chapter: Its locked down, who knows and who cares how much HP it has, its time to take this puppy to Toronto International Dragway ! Lol.. the NHRA 1/4 mile track, not the now Toronto International Airport !   What had started off as a young guys spotting a dream car in a junk yard, had really become the ultimate family project in my family . Really made possible by my Dad, and both Grandfathers playing significant roles, as did a great deal of the family. I fully realize without the s

timkingsbury

timkingsbury

Solving the Modern Overdrive with a Floor Shift using Mopar Parts

I will start this Blog entry off with a cut and paste from an entry I recently posted on the forum.   The preamble:   I am not a fan of the non-mopar t5 transmission conversion. A great deal of those transmissions have gear splits that were meant for low horsepower, low torque engines and they just do not match up well to a flathead mopar. The are also in my opinion, a great deal of work to make the conversion. There are many models of the T5 transmission, with several having very little ove

timkingsbury

timkingsbury

Part 3 - 1st car I purchased! .. Out comes the engine and the rebuild begins!

Part 3 - 1st car I purchased! .. Out comes the engine and the rebuild begins! We left off in my story with Mom knowing and surprisingly wasn’t quite ready to kill me. Of course my Mom is about 5 foot 2 and 120 pounds, and at 16 I was 6 feet and 220 pounds, but then, even I knew if she had it in for us Dad and I would be dead, lol figuratively speaking of course. In any case, the week after Mom found out about the car and we had the little family show and tell, Dad and I started on the motor. O

timkingsbury

timkingsbury

Update - "AoK - New Dual Carb intake for the USA flathead 6"

Well it has been a while since we last checked in with the progress report on the New AoK intake. As does happen some things just throw a curve ball into a project and the water jacket feature was our curve ball. We have a perfectionist as our pattern maker and while it didn't increase in price, he most certainly put in a ton of extra time trying to come up with a solution to the water jacket "perfect solution". The perfect solution really became comprised of two factors. 1) We asked if it

timkingsbury

timkingsbury

The Rough Field Spotters Guide for Mopar Overdrives

Overview:   We keep being asked about Mopar Overdrives, so I thought I would do a blog on spotting overdrives.   I know from the start this is not the definitive guide, thus I have titled it - "The Rough Field Spotters Guide for Overdrives" and this will start off being slanted towards Plymouths ! This will definitely grow as I need to take some pictures of earlier (pre-1942) overdrives to put up.   If you want to add replies with more information, super, more t

Borg Warner Overdrive Transmission - by Don Frolich

As referenced in my blog thread - The Rough Field Spotters Guide for Mopar Overdrives http://p15-d24.com/blog/17/entry-79-the-rough-field-spotters-guide-for-mopar-overdrives/ One of the great articles I would like to refer to, is one that I have been given Permission from “the living legend” - Jim Benjaminson to use here. Of course if you are not a member of the Plymouth Owners Club here is the place to Do that and catch other cool stuff and articles http://www.plymouthbulletin.com/index.h

timkingsbury

timkingsbury

Thank you everyone for all your help, shout outs! Keep them coming..

Thanks for all the awesome responses I have received from members with pictures of intakes, brochures and information as I keep putting together spotters guides on intakes and overdrives. I love the shout outs and stories behind your cars. They are great and should be up on the reference area as testimony to life lessons, great people and the stories behind their cars. From my super sleuth http://p15-d24.com/user/5770-61farnham/ from the other side of the Pond in England To Bob http://p15-d

timkingsbury

timkingsbury

Rough Spotters Guide for Intakes and their related technical information - Part 6 - Sharp or "Al Sharp Fan Club"

Sharp Speed and Power Equipment - Al Sharp First up a vintage decal from Sharp Speed and Power Equipment. Yes this is the Al Sharp who under the banner "Sharp Engineering" Sponsored (and built the Hemi Heads) for the famous - "Mooneyham & Sharp 554 1934 Coupe" that can today be found be found at Don "Big Daddy" Garlits Drag Racing Museum oh and of course of the famous Hot Wheels collection ! It seems Al Sharp acquired the Fenton intake patterns at a bankruptcy auction from Aaron Fent

timkingsbury

timkingsbury

Rough Spotters Guide for Intakes and their related technical information - Part 5 - Ellis, Thickson & McGurk

Ellis - Made intakes for Chrysler Corporation for the Dodge 331, 377 and 413 ci "super big" block truck engine. They also made aftermarket intakes for both the USA small block and the Canadian big block 6 cylinder engines. This intake is believed to be off a feb 1950 built 377 ci engine which was 4" bore and 5" stroke producing 154 hp at 3000rpm and 330 lbs of torque, 7 main bearing crank. Here is an Ellis intake courtesy of http://p15-d24.com/user/296-ralph-d25c

timkingsbury

timkingsbury

Rough Spotters Guide for Intakes, Heads, Headers - their related technical information - Part 4 - "the still mades" - Offenhauser, Fenton & Edgy

All of these intakes are still being manufactured or substantial amounts of new product still exists. Offenhauser - still made, available at many suppliers, even the big chains like Summit Racing, and they also sell "connection kits" with linkage. These dual carb intakes are for the 201, 217 and 230 USA small block engines. http://www.summitracing.com/int/parts/ofy-2691/applications Fenton - still readily available although I did not see them on the big chains. These du

timkingsbury

timkingsbury

Rough Spotters Guide for Intakes & their related technical information - Part 3 - The GrandDaddy - Dodge, Plus Vintage Speed Stuff

3rd part in the series, its for me the Grand Daddy of them all, straight from the Chrysler Engine Factory in Windsor Ontario Canada, factory Dual Carb intake, and factory Dual exhaust which were options on Dodge Trucks. Most believe they were only on 265 ci engines, however that is incorrect. They were available through a factory order on either the 250 or 265 ci motors, and at Dodge truck dealers, they would happily put them on any new truck you wished to put them on. There is a local farmer w

timkingsbury

timkingsbury

Rough Spotters Guide for Intakes and their related technical information - Part 2 Tattersfield & Nicson

In creating this spotters guide for Flathead Plymouth, Dodge, Chrysler, Desoto, Fargo intakes my hope was to show related information, pictures of various intakes, and attach any technical information and perhaps vintage ads for them. I am starting it here in hopes of putting something together with the help of many members and then maybe move it to the technical archives. . Why do it here ? Only because I or someone can edit and compile.   #2 Nicson Engineerin

timkingsbury

timkingsbury in intakes

Rough Spotters Guide for Intakes and their related technical information - Part 1 Edmunds

In creating this spotters guide for Flathead Plymouth, Dodge, Chrysler, Desoto, Fargo intakes my hope was to show related information, pictures of various intakes, and attach any technical information and perhaps vintage ads for them. I am starting it here in hopes of putting something together with the help of many members and then maybe move it to the technical archives. If there is lots of information coming forward, then maybe it becomes a given thread for each different intake For now

timkingsbury

timkingsbury

Part 2 - 1st car I purchased! Explaining this to Dad... maybe a lot easier than explaining it to Mom !

Well there it was, the 1st car I ever bought, a 1970 Dodge Challenger... I knew it was a major project, but I was thinking - "well I can get parts to fix this over at the scrap yard at no extra cost and the body looks good." So I was quite pleased with things. I was off for home and Grampa who I thought was heading to the other barn to feed the livestock was busy jacking the car up and removing the wheels, just after I left. He was also obviously on the phone with Grampa Bolton. Home I arriv

timkingsbury

timkingsbury

ok, not quite a flathead...but the 1st car I purchased !

So this isn't about a flathead and to my one grand father, he like Richard Petty would turn up his nose as it wasn't a Plymouth ! lol I have tried to recreate the conversations from my diary posts and what I can remember of conversations. Most of which I think I remember very well... lol.. Whether I did.. well at least two of the people in this story are still alive (besides me), so maybe I will run it by them sometime! My 1st car, was a car my Dad purchased for me. It was a Plymouth with a sl

timkingsbury

timkingsbury

Jan 8 Update - "AoK - New Dual Carb intake for the USA flathead 6"

Well the pattern is complete! Attached are a couple of pictures. The one with the blue cores was just before Christmas, and the other two were actually taken last week. The 1st intake will actually be cast tomorrow and then a 2nd one will be cast with the integrated water tube early next week. It will be made with its own mini foam core for the water tube. The tube will be on the inside, or block side of the intake. In that way it becomes easy to make it optional, without changing the outside

timkingsbury

timkingsbury

Happy New Years

Happy New Years ! Well on behalf of all the AoK boys, we wish you a Happy New Years ! In the last few weeks, after being nudged by a couple of members, we started to blog. I figured we would give it a month and see if I got a few followers interested in the ramblings of a group of Mopar Nuts ! We have been sincerely humbled by the responses so far. While I cant guarantee I will have the time to post as regularly throughout 2015 as I have the last month, I will try and make sure a month

timkingsbury

timkingsbury

Shout out to Mike Meier - just another awesome mopar nut !

Well as the year is coming to a quick end, a shout out to a great guy and fellow Mopar Nut! I am not 100% sure what year it was, but sometime after the earth cooled, my Dad, George Asche and I were hanging out at Chrysler Carlisle (or I guess All Chrysler Nationals) when I 1st met Mike. I think we hit it off immediately and as my Dad said, that guy has that same twinkle in his eye as you do.. Full Throttle Trouble ! Over the years we would see Mike and his buddies, and somewhere a few years a

timkingsbury

timkingsbury

Part 4 continued.. a few pictures

Its part 4 over time. Lol.. some pictures of the engine bay, the fuel block you will see on the fire wall as custom made by Dashman's Hot Rod and Speed Parts. They make super cool stuff.. You can get an idea on their ebay account (items for sale) or check out their website or give them a call. http://www.ebay.com/usr/68rrman http://www.dashman.net/ Oh yes, they are the supplier of the fuel distribution block and other cool stuff on the Worlds Fastest Dinasour ! Also pics of the beautiful re

timkingsbury

timkingsbury

Part 4 – The Plymouth gets trailered to AoK headquarters and is parked beside the “World’s Fastest Dinasour” & “Calling In Favors”

Part 4 – The Plymouth gets trailered to AoK headquarters and is parked beside the “World’s Fastest Dinasour” & “Calling In Favors” Well the Plymouth wasn’t home long and pictures were shared with my friends and the ideas and discussion of what the plans were for her. In what I will call the round table discussion with George and Rob Asche we kicked around the idea of building a race engine that would still be streetable. We had just finished off the Velociraptor or the Worlds Fastest Dinos

timkingsbury

timkingsbury

Part 3 - So what would my Aunt do.. What would me Grandfather’s do and ultimately what would my Dad do !

So I had a bit of spare time tonight so I wrote part 3.. so a little 2 in 1 night bonus, or extra stuff to put you to sleep ! Part 3 - So what would my Aunt do.. What would me Grandfather’s do and ultimately what would my Dad do ! So The 1949 Plymouth Business Coupe, was back in the family and I had spent all winter thinking about the car and what I would do with it. While I realize many people would try and make this super low mile car a 100 point trailer queen, that was really not in the ca

timkingsbury

timkingsbury

In Part 2 - The 1949 Plymouth raises its head again or the World is a small place contest winner ..

In Part two - The 1949 Plymouth raises its head again or the World is a small place contest winner .. The 1949 Plymouth would disappear and fall out of mind after Aunt Thelma had passed away. Then in 2009 at my Dad’s funeral a friend of mine told me about an old Plymouth that was for sale that I might be interested in. A couple of weeks past and I really wasn’t looking for project, but after being nagged a few times to go see the car, we embarked on a ride to St Thomas. My friend was following

timkingsbury

timkingsbury

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use